The Agilent U2741A USB Modular Digital Multimeter is a small form factor multimeter with huge capabilities. It provides a broad range of measurement functions, including temperature and frequency.

Availability: In Europe and Asia only, Japan starting July 1, 2008 and Americas starting August 1, 2008.

Availability: In Europe and Asia only, Japan starting July 1, 2008 and Americas starting August 1, 2008.

The Agilent 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. Getting connected has never been easier.

Key Specifications

• Plug and play interface
• USB 2.0 interface (USB 1.1 compatible) and IEEE 488 interface (connect up to 14 GPIB instruments)
• Standard - industry libraries mean you don´t rewrite software. IO Libraries Suite 15.0 now shipping
• High-speed - transfer over 1.15MB/sec
• Added feature - Parallel Polling (check response of up to 8 devices at one single poll)

The Agilent U2723A USB Modular Source Measure Unit is an expanded version of the standard U2722A USB Modular Source Measure Unit. It includes embedded test scripts that will simplify automated testing with up to two test scripts per channel.

The 3-channel 20V/120mA module can operate in a 4-quadrant operation. The channels could be connected in series or in parallel to achieve up to 60 V/360 mA. It uses the common non-proprietary standard high-speed USB 2.0 interface that provides ease of connectivity ─ allowing users to set up and configure their tests swiftly with its plug and play feature.

The Agilent U2121A USB digital I/O module is a small and cost-effective device that provides 32 opto-isolated digital lines. The U2121A enables quick and easy setup with full-speed USB 2.0 ?

The Agilent U2123A USB Digital I/O is a small and cost-effective device with it’s offering of 32 opto-isolated digital lines.

Agilent U2000 Series USB power sensors make setup fast and simple by providing plug-and-play USB connectivity, and by eliminating the need for a separate power meter. The U2000 Series is an affordable solution that doesn’t compromise on performance in multi-channel average power measurements. With the U2000 Series, you get what you need—simple set up, great sensing.

• Frequency range of 10 MHz to 18 GHz
• Wide dynamic range of -60 to +20 dBm
• Internal zeroing capability to eliminate external calibration
• High measurement speed of up to 250 readings/second
• Display power measurements on a PC or other Agilent’s instruments

Agilent U2000 Series USB power sensors make setup fast and simple by providing plug-and-play USB connectivity, and by eliminating the need for a separate power meter. The U2000 Series is an affordable solution that doesn’t compromise on performance in multi-channel average power measurements. With the U2000 Series, you get what you need— simple set up, great sensing.

• Frequency range of 50 MHz to 24 GHz
• Wide dynamic range of -60 to +20 dBm
• Internal zeroing capability to eliminate external calibration
• High measurement speed of up to 250 readings/second
• Display power measurements on a PC or other Agilent’s instruments

 

The Agilent E5813A Networked 5-port USB hub uses LAN technology to end the five-meter USB cabling distance limitation, allowing USB devices to be anywhere on a Local Area Network (LAN).

• Maximum connected instruments : 5
• Maximum data transfer rate : 12 Mbps per port
• Fully compatible with USB 1.1, USB 2.0 and 10BASE-T/100BASE-TX standards
• Extend USB devices beyond 5 meters
• Standard industry libraries with Agilent IO Libraries Suite

Download Agilent E5813A Data Sheet

Agilent U2000 Series USB power sensors make setup and measurement fast without the need of a power meter, just plug the USB sensor cable to the PC, you can control the USB power sensor with the Power Panel (N1918A) software.

Key Specifications

• Frequency range of 10 MHz to 6 GHz
• Wide dynamic range (-50dBm to +30 dBm)
• Internal zeroing while connected to the DUT
• High measurement speed of up to 250readings/second
• Display power measurements on a PC without the need of power meter
• Compatible with other Agilent instruments
• Time-gated and free run power measurement

Agilent U2000 Series USB power sensors make setup and measurement fast without the need of a power meter, just plug the USB sensor cable to the PC, you can control the USB power sensor with the Power Panel (N1918A) software.

Key Specifications

• Frequency range of 10 MHz to 18 GHz
• Wide dynamic range (-50dBm to +30 dBm)
• Internal zeroing while connected to the DUT
• High measurement speed of up to 250readings/second
• Display power measurements on a PC without the need of power meter
• Compatible with other Agilent instruments
• Time-gated and free run power measurement

Agilent U2000 Series USB power sensors make setup and measurement fast without the need of a power meter, just plug the USB sensor cable to the PC, you can control the USB power sensor with the Pow